Evaluation of Softwoods viz., Cupressus lusitanica, Pinus radiata and Pinus patula for Paper Making

Evaluation of Softwoods viz., Cupressus lusitanica, Pinus radiata and Pinus patula for Paper Making

Authors

  •   V. L. Moorthy
  •   S. R. D. Guha
  •   Y. K. Sharma
  •   G. M. Mathur

DOI:

https://doi.org/10.36808/if/1977/v103i5/11683

Abstract

Laboratory scale, pilot plant acale and mill sCale trials on mixtures of three conifers viz., Cupressus lusilanica, Pinus patula and Pinus radiata grown in Kenya have been deacribed. The fibre length or the pulps were 1.90 mm., 3.05 mm and 2.82 mm respectively for C. lusitanica, P. radiala and p. patula. Pulps in satisfactory yield and strength properties should be prepared by the species separately as well as in lower tearing strength then the other species. Bleachability or pulps were good. Pilot plant scale trials and mill scale trials confirmed the laboratory results.

Downloads

Download data is not yet available.

Author Biographies

V. L. Moorthy

S. R. D. Guha

Y. K. Sharma

G. M. Mathur

Published

1977-05-01

How to Cite

Moorthy, V. L., Guha, S. R. D., Sharma, Y. K., & Mathur, G. M. (1977). Evaluation of Softwoods viz., <I>Cupressus lusitanica, Pinus radiata</I> and <I>Pinus patula</I> for Paper Making. Indian Forester, 103(5), 336–348. https://doi.org/10.36808/if/1977/v103i5/11683

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >> 
Loading...