Contribution of End Grain of Wood in Vacuum Drying

Contribution of End Grain of Wood in Vacuum Drying

Authors

  •   Shailendra Kumar   Wood Seasoning Discipline, Forest Products Division, Forest Research Institute, Dehradun-Uttarakhand
  •   Rushikesh R. Topare   Wood Seasoning Discipline, Forest Products Division, Forest Research Institute, Dehradun-Uttarakhand

DOI:

https://doi.org/10.36808/if/2019/v145i1/116831

Keywords:

Longitudinal permeability, Vacuum press drying, Effect of end grain

Abstract

Wood specimen of Melia composita were dried in a vacuum press dryer under two initial moisture contents (IMC) i.e., above and below fibre saturation point (FSP). In order to understand the effect of end grain on vacuum drying, half of the wood specimens were end sealed and remaining half were left with unsealed ends. Two drying runs i.e. with initial moisture contents above and below fibre saturation point, with both types of wood specimen (end sealed and unsealed ends) were conducted. The contribution of end grains in wood drying is insignificant when IMC is below FSP. The drying rates were more than 3-4 times higher for specimens with high IMC i.e. above FSP.

References

Chen Z. (1997). Primary Driving Force in Wood Vacuum Drying. Ph.D. thesis, Virginia Polytechnic Institute and State University, Virginia, USA.

Haar V.L., Gallagher J.S. and Kell G.S. (1984). NBS-NRC Steam Tables (Hemisphere Publishing Corp., New York, 1984.

Hart C.A. (1964). Principles of Moisture Movement in Wood.Forest Products Journal, 14 (5):207-214.

Pandey C.N. and Jain V.K. (1992). Wood seasoning Technology. Published by the Editor, Editorial board, FRI, Dehradun, on behalf of ICFRE , pp136.

Pandey C.N., Kambo A.S. and Gandhi B.L. (1999). Exploratory experiments on vacuum press drying of Eucalyptus spp, Wood News, Jan.-March.1999.

Saravanan V., Parthiban K.T., Sekar I., Kumar P. and Vennila S. (2013).Radial variations in anatomical properties of Melia dubia cav. at five different ages. Scientific Research and Essay, 8 (45): 2208 - 2218.

Siau J.F. (1971). Flow in Wood, Syracuse University Press, Syracuse, New York, 131 pp.

Stamm A.J. and Laughborough W.K. (1935). Thermodynamics of the swelling of wood. J. Phys. Chem., 39 (1): 121-132.

Downloads

Download data is not yet available.

Published

2019-03-12

How to Cite

Kumar, S., & Topare, R. R. (2019). Contribution of End Grain of Wood in Vacuum Drying. Indian Forester, 145(1), 52–55. https://doi.org/10.36808/if/2019/v145i1/116831

Most read articles by the same author(s)

1 2 > >> 
Loading...